Step-by-Step Instructions
Taking apart your Sleep Number bed can be a daunting task, but with the right approach, you can do it without any problems. Below are some step-by-step instructions to help you disassemble your Sleep Number bed.
1. Start by removing the mattress cover
The first step to taking apart your Sleep Number bed is to remove the mattress cover. Start at the head of the bed and gently remove the cover, making sure not to tug or pull at it.
2. Release the air from the mattress
After removing the mattress cover, you need to release the air from the mattress. You can do this by using the Sleep Number remote control. Select the deflate option, and the air will start to release from the mattress.
3. Undo the hoses and disconnect the pump
After the air has been released from the mattress, it is time to undo the hoses and disconnect the pump. Start by disconnecting the hoses from the pump. Once the hoses are disconnected, carefully remove the pump from the hose.
4. Take off the base cover
Now that the pump and hoses have been disconnected, you need to remove the base cover. Start by turning the bed over so that the bottom is facing up. Locate the snaps on the base cover and gently unsnap them.
5. Remove the nuts and bolts
Once the base cover is removed, locate the nuts and bolts that secure the frame of the bed. Use a wrench to remove them. Make sure to keep all the nuts and bolts in a safe place, as you will need them later to reassemble the bed.
Tools Needed
You will need a few tools to take apart your Sleep Number bed. Some of the tools you will need include:
1. A wrench
2. The Sleep Number remote control
3. A screwdriver (if necessary)
Things to Remember
When taking apart your Sleep Number bed, there are a few things to keep in mind. Some of the most important things to remember include:
1. Keep all nuts, bolts and screws in a safe place.
2. Be careful when handling the mattress so that it does not tear or get damaged.
3. Make sure to follow the manufacturer’s instructions carefully to avoid damaging the mattress or any other component of the bed.
Tips for Reassembling Your Sleep Number Bed
Once you have taken apart your Sleep Number bed, you will need to reassemble it. Here are a few tips to help you reassemble your bed properly:
1. Use the nuts, bolts and screws that you removed to put the bed back together.
2. Follow the manufacturer’s instructions carefully to make sure that you reconnect all hoses and electrical connections correctly.
3. Be patient, as it may take some time to reassemble the bed properly.